Remove the connecting wires from the start switch and test the switch’s terminals with a multimeter.When removing wire connectors, take a photo or mark the wire connectors to ensure each connector is put back correctly when the repair is complete.On most models, the lint trap will also need to be removed. On most models, you will need to remove the dryer’s top panel to access the screws to the control panel.The start switch can be tested with a multimeter to determine if it needs replacing. If your dryer has a rotary or push-start switch to turn on the dryer, the switch may be responsible for your dryer not starting. If the multimeter display does not significantly change or the needle does not move, the switch does not have continuity and will need to be replaced. Test the door switch for continuity with a multimeter.Unscrew the door switch from the dryer.Remove the wires connected to the door switch.Check your dryer manual if you are unsure of its location. The door switch on front-loader dryers can usually be accessed by removing the dryer door panel. On top-loader dryers, the door switch is typically accessed by removing the control panel and lint trap.However, it still pays to check the door switch with a multimeter. If you can hear the door switch clicking, it is most likely working. Checking the door switch can be as easy as listening to the clicking sound of the door switch when you close the dryer door. Sometimes, the door switch will malfunction or the connection becomes loose, causing the dryer to think the door is still open. The door switch on a dryer is another safety precaution designed to stop the dryer from operating when the dryer door is open. If the needle doesn’t move or the display does not change significantly, it does not have continuity and will need to be replaced. The fuse should show a reading of 0 ohms, indicating that it has continuity. Test the thermal fuse for continuity with a multimeter.Remove the thermal fuse from the dryer or isolate it.Check your dryer manual to locate it on your model. On other models, the bottom-front panel can be removed to access the fuse.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |